Why Does My Laptop Keep Disconnecting From Wi-Fi [Solved] 2022

When you’re using your laptop, it’s very frustrating when you can’t access the internet because your device keeps disconnecting from the Wi-Fi. With this guide, we will be covering some simple and helpful tips on how to solve this problem so that you can get back on track with browsing the web, sending emails, and even working remotely.

Laptop users are well aware that sometimes their laptops encounter trouble in connecting to the wireless network. This happens especially when you’re at home and you’ve used your laptop for years with no problem. What could be causing this? Well, if only there were just one cause then it would have been easier to find a solution! It’s probably caused by several factors all pointing to one end.

Possible Reasons Why Your Laptop Keep Disconnecting From Wi-Fi.

1.Changes To The Configuration Of Your Wireless Router

Sometimes, the wireless router that you’ve been using for years suddenly needs a configuration update because it might have acquired some malware or its frequency band changes. To fix this, you will need to reconfigure your router. It’s a process that may be time-consuming especially if you’re not the type who reads unit manuals.

2.Additional Wireless Routers With Similar Network SSIDs

If you bought a new wireless router and installed it in your home, then chances are, you will need to change the name of the wireless network to distinguish it from your original router. A common practice is to add a new router on top of your current one and use an SSID with a different name.

However, you must remember that if the SSIDs of two routers are similar enough then they can still confuse your laptop and result in connection problems. This is why it’s common for routers to have unique names. It can be time-consuming to configure each router properly and make them work together, but it’s worth the effort as this will provide your laptop with a steady wireless connection.

Read This one too: 9 Ways to speed up laptop

3.Interference From Other Wireless Devices In Your Home

If you’re not very careful and smart about choosing the best spot in your home to install your wireless router, then you may experience connection problems. Wireless routers are not as powerful as wired routers and they need to share their signals with laptops, mobile phones, baby monitors, cordless phones, microwaves ovens, and other consumer electronic devices.

If these devices interfere with the wireless signal of your laptop, then your laptop will have a hard time staying connected to the network.

4.Computers Networking Malfunctions

Like any home electronic device, wireless routers can also malfunction from time to time. This means that if you’ve been complaining about connection problems since last month but you didn’t bother to check on your router, then it could be the cause.

It’s best to check on the router first if you’re having connection problems before thinking of other factors that can result in this problem.

5.Wireless Protection On Your Laptop

Did you know that your laptop can protect itself from too much wireless exposure? There are laptops with wireless protection features built-in so you don’t have to worry about the wireless signals and networks that surround your laptop.

There are also laptop accessories like Wi-Fi signal boosters which can extend your wireless network so you won’t experience connection problems even if there’s a new router in your home.

6.Mobile Broadband Modem

If you use mobile broadband for internet access, then remember that it won’t provide you with wireless access. You may still need to use your home internet connection provided by the ISP (internet service provider).

If you don’t plug in your wireless router and instead rely on mobile broadband for internet access, then chances are, you will have connection problems especially if there’s a problem with the SIM (subscriber identity module) card.

7.Thermal Problems With Your Wireless Card

If your laptop is generating too much heat, then it may affect the performance of your wireless card. This means that if you’re heavily using your laptop and its temperature is reaching a dangerous level, then its wireless card may not perform as intended. To fix this, you may need to get a cooling pad for your laptop and use it when possible.

You may like to Read: Difference Between Chromebook and laptop

Other Possible Reasons To Explain Why Your Laptop Keeps Disconnecting From Wi-Fi

Most of the time, you’ll know what’s causing your connection problems because you only have to worry about the place where you’re using your laptop.

However, if you’re using other laptops around your home and they’re having problems with connection, then it may be because there’s one device that’s interfering with their wireless signals. The best way to find out what device is causing the problem is to scan for available wireless networks so you can see the signal strength of your device

If one is causing disruption to other networks, then you may need to disconnect it from its power source until the laptop with connection problems is fixed.

The first step in solving this issue is to ensure your wireless connection is not turned off. On a Windows 10 operating system, click on the windows key and press ” WLAN” which should bring up all available wireless networks. Ensure that your network shows up in this list and double-check if it’s enabled by right-clicking on the name of your network followed by clicking “enable.” If you are encountering issues connecting, the next step is to troubleshoot your wireless connection. To do this, follow these steps:


Possible Solution of Disconnecting Wi-Fi on laptop

1. troubleshoot your wireless connection

1. Open up your windows search bar and type in “Troubleshoot” then select the first result that pops up and click on “Troubleshooting.”

2. Select “Network Adapter” and click next to start troubleshooting the issue. If the problem still persists after going through this process, it’s time to make some changes to your network settings. The first thing you want to do is disconnect from any open networks as they could be causing issues with the stability of your internet connection. This can be done by opening up your Wi-Fi settings and clicking on any open networks followed by selecting “forget this network” .

The next thing you want to try is to connect directly using an Ethernet cable. You can do this by plugging your laptop into a nearby wall and selecting the wireless icon in your taskbar followed by clicking on “connect.” If you don’t have an Ethernet cable, look for an available port on any of the older computers in the office or even buy one off amazon for less than $5. If it’s possible, turn off all other wireless devices around you as they could be causing interference with your internet connection.


2. Update OS

Finally what most people tend to forget is that there are new updates coming out every month improving performance and solving issues like these so it’s very important that stay up-to-date on your software.

Mostly Reasons are, if your laptop’s Wi-Fi adapter Driver is not updated, or not installed. Once you will update the windows OS this will solve the problem quickly.


3.Setting Wi-Fi on Windows:

To disconnect Wi-Fi on the laptop, press Win+Ctrl+F4. To connect it again, or right-click on the Network tray icon and select ‘Toggle Network Connection’.

Note that this is the default behavior in Windows only.

Note that you can disconnect the Wi-Fi connection on a laptop by unchecking the “Connect Automatically” option in the Wireless Network Properties window.

If this setting is enabled (checked) your Wi-Fi will always try to connect when the laptop powers up and there is a wireless network available.


4. Airplane Mode

If you are running Windows and it is connected to a wireless network, try turning the on/off airplane mode button inside the Wi-Fi network listing on the taskbar. A possible scenario for this Wi-Fi power-saving process might be flight or bus prevention from cellphone radio smog creation.

This is the default feature of the Microsoft Windows Operating System – Aero Mode. To renewable, it press Win+I shortcut or right-clicks on your desktop,

choose to Personalize then click the ‘Window Color’ icon, then ‘Open classic appearance properties for more color options.

Then select the Open classic appearance properties for more color options button from the Personalization window. In the next window, open the ‘Window Color’ tab then selects Aero from the Appearance drop-down menu.

To disconnect the Wi-Fi connection on a laptop by open Control Panel and double click the Network Connections icon, right-click Wireless Network Connection or Local Area Connection representing your wireless adapter in Device Manager and choose Disable from the contextual menu. Reboot to activate this workaround solution. Note this is a temporary setting change.


5.Check Network on  Windows:

  • Go to the search bar by clicking the windows button.
  • Search for “ncpa.cpl” and open it.
  • Now find your active network connection, right click on it and select properties .
  • Then uncheck both options given below:
  • Check mark : Check ‘Allow computer to turn off this device to save power’ For this right click on the active connection again and select ‘Power management’.
  • Check mark : Check ‘Allow this device to wake the computer’ Now checkmark both ‘Allow’ boxes given at the bottom of the window.
  • Hit Apply followed by OK and you’re done .
  • Network discovery should now turn off as expected. (Note: If you do not have a Power management option , then your network adapter driver may not support it. In this case, you can try third party drivers from manufacturers like Intel.

6. Solve Manual With CMD

If you’re still facing the same issue, Then follow these steps. Open Command Prompt with Administrator rights.

Type powercfg -lastwake command and hit enter to check what woke your system last.

For some, the culprit may be a scheduled task. In this case, disable that particular task or delete it.

Now reboot your system and see if you’re able to turn off Network discovery

“Settings”->”Network & Internet”->”Network discovery”.

If network discovery still doesn’t turn off even after disabling all the tasks then follow these steps.


7. Using Registry:

  • Open Registry Editor by typing regedit in the search bar/run prompt.
  • And then follow this path HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows
  • Now create a new DWORD value on your right side and name it ‘AllowNetworkDiscovery’ without quotes. Double click on it and make sure the value is set to ‘0’.
  • Restart your system and you’re done you can now turn off network discovery successfully.
  • (Note: If you do not find AllowNetworkDiscovery DWORD then create one by right clicking on the empty space of the right-side pane, clicking new in the menu that appears, then selecting DWORD (32-bit) Value. Rename that new value to AllowNetworkDiscovery ).

Final Words:

Conclusion paragraph: Wi-Fi is one of the most convenient methods for getting online. However, it’s not always reliable and can lead to some frustrating disconnections if you’re trying to work on something important.

What are the top reasons why your laptop might be disconnecting from Wi-Fi? The most common causes of this issue include a weak signal, interference on the network, or even just bad settings. No matter what’s causing your problem, you can fix it by following these steps to diagnose and cure it.

With that in mind, here are a few things you should know about your wireless connection so that you can troubleshoot any issues with ease.   We hope this post has helped! Thanks!

error: Content is protected !! Don\'t Try To Copy Be Carefully
Exit mobile version